Sweden VPS: how to choose a server, which plans are in stock and how to order

You probably already know why you want a VPS in Sweden: an audience in Northern Europe, a presence in a specific country, or a second location for a project that lives elsewhere. What is left is picking a plan, and that is where most people stall. This guide covers only what WeaselCloud sells in Sweden right now, with prices as of 28 October 2026, a direct order link for each plan, and a list of what to check before you pay.

Order a VPS in Sweden: https://my.weasel.cloud/store/vps-sweden. The page shows the remaining stock for each plan and the "starting from" price.

In short. You can rent a VPS in Sweden for $3.00 to $42.00 a month (prices as of 28 October 2026; the order page is the final word). A small site fits the entry plans. For a CMS with a database start at Himalia SE (2 vCPU, 4 GB), and for several services at Elara SE (4 vCPU, 8 GB). Most plans have a 200 Mbit/s port; Carme SE has 100 Mbit/s. Backups are not mentioned on the plans page, so plan to make your own. Do not guess latency: measure it with ping and mtr.

When a server in Sweden makes sense

Sweden is in Northern Europe. Finland, Estonia, Latvia, Lithuania and Poland lie across the Baltic Sea, and Norway and Finland share a land border with it. That is plain geography, and it gives you a starting hypothesis only: the closer the server is to your users on the network, the shorter the packet's path. Closer on the map does not always mean faster, though. Carriers decide the route, and two people in the same city can reach the same server by different paths. So you test the hypothesis, and the sections below show how.

People usually take a Swedish server in these cases:

• Audience in Northern Europe. A site, shop or service for users in Sweden and neighbouring countries.
• A second location. The main server is in another country, and Sweden hosts a copy, a staging environment or a standby node. If one location goes down, you have another.
• Checking your project from outside. You want to see how a site or API opens from a different country and network.
• Spreading projects around. You run several projects and prefer not to keep them all on one server in one country.

When Sweden is not the best choice

If nearly all your users sit in one place, the location closest to them usually wins. The WeaselCloud store has 13 categories, including Finland, the Netherlands, Germany, Estonia, Latvia, Lithuania, Poland, France, the US (NJ), the UK and Moscow. Work out where most of your visitors live and do not pick Sweden by default. If you hesitate between two neighbouring locations, order the smallest plan in each and compare the measurements; a month of that costs little. The same reasoning for another country is laid out in Netherlands VPS: how to choose a server.

Two more constraints to know up front. First, the Sweden page asks customers not to order these services for hosting or running game servers. Second, the page does not name the city where the datacenter stands. It says only that the servers sit in a TIER 3 datacenter. Do not count on a particular traffic exchange point and do not promise one to your own customers.

Which Sweden VPS plans are in stock

To buy a VPS in Sweden, pick a row and follow the link in the last column. The table is built from the VPS in Sweden page as of 28 October 2026. The page shows the price as "starting from" and monthly. Plans that are out of stock are left out of the table. The page also shows the remaining stock next to each plan ("Available"): for the larger plans it is small and can run out before you decide. Check the price on the order page before you pay.

What every plan has in common, according to the page:

• KVM virtualization: your server runs its own operating system kernel, so you get full control of the system;
• DDR4 ECC memory (with error correction) and an SSD;
• unmetered traffic;
• free setup;
• Windows is available from Himalia SE upward; Io SE and Calisto SE are Linux only.

The disk is an SSD on every plan.

How to pick a plan for your workload

There is no universal answer, but there is an order of thinking. First estimate the memory your heaviest process needs; that is usually the database. Then add headroom for the system and for peaks. CPU and disk are normally the second pass. A method for calculating instead of guessing is in how much CPU and RAM a server needs. The table below gives starting points from the plans in stock. They are guidelines, not guarantees: the real need depends on your application.

A word on Carme SE. On paper it is a neat step between Elara SE and Ananke SE (6 vCPU, 12 GB, 120 GB), but its port is 100 Mbit/s while the neighbouring plans have 200 Mbit/s. If the server will serve files or a lot of traffic, look at Ananke SE: it costs $6.00 more and has the wider port. If traffic is modest and you need six cores and 12 GB, Carme SE fits.

Do not buy the biggest plan "for growth". You can change plans later, but money spent on memory the server never uses is gone. How to do it is in how to change your VPS plan. Start with the smallest plan that is enough, look after a couple of weeks at how much memory is actually in use (free -h), and decide then.

What to check before you pay

Port: 200 Mbit/s or 100

The port is the width of the server's connection, in Mbit/s. 200 Mbit/s is at most about 25 MB/s and 100 Mbit/s about 12.5 MB/s, eight times less than the megabit number suggests. For a site, an API or a bot that is normally enough, since a page weighs hundreds of kilobytes. The port becomes the bottleneck when you serve large files or video to many people at once. What "port" and "unlimited" really mean, and how to measure speed, is covered in "200 Mbps" and "unlimited" on a VPS.

Backups

This is the usual blind spot. The Sweden plans page mentions neither backups nor snapshots (point-in-time disk images), so assume there are none and that you make your own. Set them up before important data lands on the server, not after the first loss. A walkthrough is in how to back up your VPS yourself. If you want an automatic copy from the hosting side, ask support before paying and do not rely on it until you have a confirmation.

IP, protection and support

If you need IPv6 or DDoS protection, the page says nothing on either, so ask in advance. It takes a minute, and the answer may change your choice of location. Write the request so it can be solved in one reply: what you need, on which plan, and why. How is in how to open a support ticket. We do not promise a response time because the site does not state one.

How to order a VPS in Sweden step by step

This is the short version. The full walkthrough with explanations is in how to order your first VPS. Button names below come from that article and from the Sweden page.

1. Open the Sweden VPS page, or click "Order New Services" in the client area and choose Sweden in the "Categories" list on the left.
2. Click "Order Now" on the plan you want (or use the link from the table above). Check the "Available" number: at zero the plan cannot be ordered, so take the next one.
3. Under "Choose Billing Cycle" keep monthly. On a first server there is no reason to lock in a long term before you know the location and plan suit you. Longer cycles cost less per month, but they make sense once you are sure of the plan.
4. In "Operating System" choose a newer version from the list. The default may be Ubuntu 20.04 LTS, and a new server deserves something fresher.
5. Leave the "IP Addresses" slider at one address unless you have a reason for more. Check the total in the payment block and click "Continue".
6. On the review page tick "I have read and agree to the Terms of Service" (the button stays inactive without it) and click "Checkout". After "Checkout", complete the payment by card or cryptocurrency (methods as in the knowledge-base article; not checked in the Sweden cart).
7. The "Order Confirmation" page opens. Click "Continue To Client Area". Your server appears under "Your Active Products/Services", and when it is ready its status reads "Active".

The IP address and root password are listed on the server management page (the button next to the server under "Your Active Products/Services"). Then connect over SSH and close the basic holes with securing a fresh VPS: the first 10 minutes. On the first login, confirm the server got what you bought. One command prints the core count, memory and disk:

nproc && free -h && df -h /

nproc prints the number of cores, free -h shows memory in readable units, and df -h / shows the size of the main partition. The numbers should be close to the plan. The system itself takes some memory and disk, so they can come out a little lower than advertised. If the gap is large, write to support and attach the output.

How to measure latency to a server in Sweden

Latency (RTT, round-trip time) is how long a packet takes to reach the server and come back, in milliseconds. It depends on distance and route. One number does not tell the whole story of how a site responds: a new connection adds TCP setup and the TLS handshake on top. So a difference of tens of milliseconds matters to an application making many small requests and hardly shows on an ordinary page.

Measure from where your visitors will be, not from the server itself. There are three routes, from cheapest to most expensive.

• Before ordering. Ask support whether there is a test address of a server in Sweden you could ping. This is a question, not a promise: such an address may not be available.
• After ordering. Take the smallest plan for a month and measure on it. This is the most honest option: you see the path from your own provider to your own server.
• Comparing locations. If you are choosing between countries, order a small plan in each and run the same commands against every address.

We have no Weasel server in Sweden to measure against, so there are no borrowed or made-up numbers in this article. The result depends on your provider, your city and the route. Run the test yourself.

The first command shows the overall response. The -c 10 flag sends ten packets instead of an endless stream (on Windows the same job is ping -n 10):

ping -c 10 SERVER_IP

At the end you get a line with minimum, average and maximum values and the spread (min/avg/max/mdev). Look at the average and the spread: steady values beat "fine on average but jumpy". Packet loss in ping does not prove a problem on its own, because many networks rate-limit ICMP separately from regular traffic.

The second command shows the packet's path hop by hop. It is not always installed; on Ubuntu and Debian run sudo apt install mtr-tiny. The -r flag prints a final report, -w keeps hostnames from being cut off, -z shows autonomous system numbers (the networks of individual operators), and -c 50 sets 50 probes:

mtr -rwz -c 50 SERVER_IP

For a website it is more accurate to probe the web server port itself, the same test over TCP (some systems need sudo):

mtr -rwz -T -P 443 -c 50 SERVER_IP

A jump on one intermediate hop that does not carry through to the end is usually harmless: routers answer service probes more slowly than they forward traffic. It is more worrying when the jump appears on a hop and stays to the last line. Even then it only hints at a section of the path and is not a verdict. Repeat the test at different times of day.

Once a site is running on the server you can measure what a visitor sees. The command below requests a page and prints two times: when the connection was established and when the first byte of the response arrived (on Windows use curl.exe and -o NUL):

curl -o /dev/null -s -w "connect: %{time_connect} first_byte: %{time_starttransfer}\n" http://SERVER_IP/

Every curl run is a separate process and does not reuse an earlier connection, so run it 5 to 10 times and look at the range, not at a single number. First-byte time includes the site's own work, not just the network, so compare locations with it only when the site is the same.

Checklist before paying

• The plan is in stock: the "Available" number next to it is above zero.
• Memory covers the heaviest process with room to spare, not just barely.
• The port suits you: 200 Mbit/s, or 100 on Carme SE.
• You know backups are yours to make, and you have a plan for them before the first data arrives.
• If you need IPv6, DDoS protection or anything else the page does not mention, you asked support and got an answer.
• The server will not be used for game servers.
• Billing cycle is monthly, and the operating system version is newer than the default.
• After the order you have scheduled hardening, a first backup and a latency test.

FAQ

Which Sweden VPS plans are in stock?

As of 28 October 2026, nine plans: from Io SE (1 vCPU, 1 GB, 20 GB SSD, $3.00 a month) to Metis SE (8 vCPU, 28 GB, 200 GB SSD, $42.00). The full list with order links is in the table above. Stock and prices change, so check the order page.

How much does it cost to rent a VPS in Sweden?

On 28 October 2026 the cheapest plan is $3.00 a month and the most expensive one in stock is $42.00. The page shows the price as "starting from" and monthly; the total appears in the payment block during configuration. Setup is free.

Where in Sweden is the server, and what latency will I get?

The plans page does not name the city of the datacenter; it states only the TIER 3 level. Latency cannot be named in advance because it depends on your provider and route. Measure it yourself with ping and mtr from where your audience lives, and repeat at different times of day.

Does a Sweden VPS include backups and DDoS protection?

The Sweden plans page mentions neither. Make your own backups, and if protection is a must for you, ask support before paying. Do not rely on anything that is not in the description.

Can I run Windows on a VPS in Sweden?

According to the plans page, Windows is available from Himalia SE (2 vCPU, 4 GB) upward. Io SE and Calisto SE are Linux only. Check the available versions in the order form.

Takeaways

• Sweden suits an audience in Northern Europe, a second location and spreading projects around, but "closer on the map" must be confirmed by measurement.
• Nine plans are in stock, from Io SE at $3.00 to Metis SE at $42.00 a month (prices as of 28 October 2026).
• For a CMS with a database start at Himalia SE (4 GB), for several services at Elara SE (8 GB); do not buy the biggest plan "for growth".
• The port is 200 Mbit/s, 100 Mbit/s on Carme SE: enough for sites and APIs, not for serving large files.
• Backups are not mentioned on the page: make your own before important data arrives.
• Datacenter city, IPv6 and DDoS protection are not stated on the page; ask support before paying for anything you need.
• Measure latency yourself with ping and mtr, and on a live site with curl.
• Do not order these plans for game servers: the page asks customers not to.

Order a VPS in Sweden: https://my.weasel.cloud/store/vps-sweden. Pick a plan from the table above, or open the page and check stock and price before you pay.

🎁 40% off the first month of a new VPS. Promo code GUIDE40
Need a server for your tasks? The first month at a discount.
Enter GUIDE40 at checkout. One use per customer.
Pick a VPS and claim the discount →